A SIMPLIFIED ASSESSMENT OF THE LOAD BEARING CAPACITY OF SUCTION CAISSON FOR OFFSHORE WIND TURBINES BASED ON FINITE ELEMENT ANALYSIS
Abstract
Suction caisson is widely used for offshore wind turbine applications. Its loadbearing capacity depends on the bucket geometry and its embedded soil properties. This paper presents a simplified assessment of the loadbearing capacity of suction caisson based on finite element analysis using the Plaxis 2D program. The load-bearing capacity of the suction caisson is determined based on the resulting load-displacement curve via the tangent intersection method. In addition, this study developed an equivalent equation exploring the relationship between the load-bearing capacity of the suction caisson and the surface foundation. The findings
in the study showed that the geometry of the suction has a significant influence on its loadbearing capacity. The suction caissons whose aspect ratios are larger resulted in higher loadbearing capacities. Besides, the equivalent equation in this study could be applied to effectively estimate the load-bearing capacity of suction
caisson based on its geometry. The finite element program and the soil ground model analyzed in this study was only an assumption. In the future, experimental studies should investigate the loadbearing capacity of a suction caisson related to its geometry and the embedded soil profile using centrifuge models and large-scale models.
Downloads
References
2019;171: 273–285.
[2] Vicent S, Kim SR. Evaluation of horizontal and vertical bearing capacities of offshore bucket work platforms in sand. Applied Ocean Research. 2020;101:
102198.
[3] Zhai H, Li D. Experimental Studies on modified
suction caissons in fine sand subject to uplift loading.
Transactions of Tianjin University. 2017;23(6): 562–
569.
[4] Nielsen SD. Finite element modeling of the tensile
capacity of suction caissons in cohesionless soil.
Applied Ocean Research. 2019;90: 101866.
[5] Houlsby GT, Ibsen LB, Byrne BW. Suction caissons
for wind turbines. Frontiers in Offshore Geotechnics:
ISFOG, Perth, WA, Australia. 2005; 75–93.
[6] Byrne B, Houlsby G. Foundations for offshore wind
turbines. Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical
and Engineering Sciences. 2003;361(1813): 2909–
2930.
[7] Wang X, Zeng X, Li J. Vertical performance of
suction bucket foundation for offshore wind turbines
in sand. Ocean Engineering. 2019;180: 40–48.
[8] Le Chi H, Kim SR. Evaluation of vertical and horizontal bearing capacities of bucket foundations in
clay. Ocean engineering. 2012;52: 75–82.
[9] Xia H, Zhou X, Zhou M, Niu F, Zhang X. Capacity of
caissons in stiff-over-soft clay under combined V–HM
loadings. Ocean Engineering. 2021;229: 109007.
[10] Ahn J, Lee H, Kim YT. Holding capacity of suction
caisson anchors embedded in cohesive soils based
on finite element analysis. International Journal for
Numerical and Analytical Methods in Geomechanics.
2014;38(15): 1541–1555.
[11] Fu D, Zhang Y, Yan Y. Bearing capacity of a
side-rounded suction caisson foundation under general loading in clay. Computers and Geotechnics.
2020;123: 103543.
[12] Brinkgreve R, Swolfs W, Engin E. PLAXIS 2D 2017.
User manual. 2017.
[13] Patel SK, Singh BA. Parametric study on the vertical pullout capacity of suction caisson foundation
in cohesive soil. Innovative Infrastructure Solutions.
2019;4(1): 1–11.
[14] Jin SC, Zhang YT, Wu QH. A Study on the failure
mechanism of suction caisson under vertical load. In
Applied Mechanics and Materials. 2013;256: 1985–
1989.
[15] Byrne B, Houlsby G. Drained behaviour of suction
caisson foundations on very dense sand. Offshore
Technology Conference. 1999.
[16] Eid HT. Bearing capacity and settlement of skirted
shallow foundations on sand. International Journal
of Geomechanics. 2013; 13(5):645–652.
[17] Andersen KH, Murff JD, Randolph MF. Deepwater
anchor design practice phase II report to API/Deepstar volume II-suction caisson anchors. Offshore
Technology Research Center. 2003.
