DESIGN, FABRICATION AND EVALUATION OF LPG-FUEL INJECTION SYSTEM FOR MOTORBIKES

  • Du Trong Ho Industrial University of Ho Chi Minh City, Vietnam
  • Men Van Truong Tra Vinh University, Vietnam
  • Quang Thanh Le Industrial University of Ho Chi Minh City, Vietnam
  • Du Quang Pham Industrial University of Ho Chi Minh City, Vietnam
Keywords: LPG fuel, LPG fueled motorbikes, LPG injection system, motorbikes using clean fuel

Abstract

Liquified Petroleum Gas (LPG) fuel is currently an energy source being widely applied in many fields in Vietnam, making a significant contribution to the development of the national economy. This paper presents research results of applying LPG fuel used in motorbikes. The traditional liquid fuel system (gasoline) on a motorbike was replaced by an electronically controlled LPG fuel injection system. LPG fuel is designed to inject into the intake manifold. The injection quantity and injection timing are calculated and controlled by the electronic control unit through the calculation and analysis of the input of key parameters such as intake air pressure and temperature, throttle position, engine speed, and camshaft position. The testing results on real roads in an urban area show that the motorbike operates stably on flat and uphill roads. In addition, the cost of LPG fuel
consumption is less than that of the gasoline fuel consumption.

Downloads

Download data is not yet available.

References

[1] Duc Nguyen Huu, Van Nguyen Ngoc. Analysis study
of current transportation status in Vietnam’s urban
traffic and the transition to electric two-wheelers
mobility. Sustainability. 2021;13: 5577.
[2] An Minh Ngoc, Hiroaki Nishiuchi, Nguyen Van
Truong, Le Thu Huyen. A comparative study on
travel mode share, emission, and safety in five Vietnamese Cities. International Journal of Intelligent
Transportation Systems Research. 2022;20: 157–169.
[3] Nilaj Deshmukh, Nitesh P. Yelve. Investigation on
feasibility of LPG as a fuel for motorcycle. National
Conference on AAQMENT.2006; 406–414.
[4] Laurencas Raslavicius, Art ˇ uras Ker ¯ sys, Saulius ˇ
Mockus, Neringa Kersien ˇ e, Martynas Starevi ˙ cius. ˇ
Liquefied petroleum gas (LPG) as a medium-term option in the transition to sustainable fuels and transport.
Renewable and Sustainable Energy Reviews. 2014;32:
513–525.
[5] Tasic T, Pogorevc P, Brajlih T. Gasoline and lpg exhaust emissions comparison. Advances in Production
Engineering & Management. 2011;6:87–94.
[6] Bielaczyc P, Szczotka A, Woodburn J. A comparison
of exhaust emissions from vehicles fuelled with petrol,
LPG and CNG. IOP Conf. Series: Materials Science
and Engineering. 2016; 148:012060.
[7] Akple MS, Biscoff RK, Turkson RF, Dzokoto ST.
An assessment of tail-pipe emissions from petrol and
LPG fuelled vehicles in Ghana. International Journal of Engineering Sciences & Research Technology.
2014;3: 640–646.
[8] Nagoro IHA, Suryono E, Prasetyo RD, Nandita SHA.
Performance and emission characteristics of LPG in a
spark-ignition engine. Journal of Physics: Conference
Series. 2020;1517: 012037.
[9] Ayhan V, Parlak A, Cesur I, Boru B, Kolip A. Performance and exhaust emission characteristics of a diesel
engine running with LPG. International Journal of
the Physical Sciences. 2011;6: 1905–1914.
[10] Bùi Văn Ga, Trần Văn Nam, Hồ Tấn Quyền, Phạm
Thị Đông Phương. Sử dụng LPG trên xe gắn máy
và xe buýt nhỏ. Báo cáo dự án. Trung tâm Nghiên
cứu Bảo vệ Môi trường, Đại học Đà Nẵng; 2009.
[Bui Van Ga, Tran Van Nam, Ho Tan Quyen, Pham
Thi Dong Phuong. Use of LPG on motorcycles and
small buses. Project report. Environmental Protection
Research Center, University of Da Nang; 2009].
[11] Suthisripok T, Phusakol N, Sawetkittirut N. Bi-fuel
system - gasoline/LPG in a used 4-stroke motorcyclefuel injection type. In: Asia Conference on Mechanical and Material Engineering (ACMME2017), 5th.
IOP Publishing; 2015.
Published
29-June-2022
How to Cite
1.
Ho D, Truong M, Le Q, Pham D. DESIGN, FABRICATION AND EVALUATION OF LPG-FUEL INJECTION SYSTEM FOR MOTORBIKES. journal [Internet]. 29Jun.2022 [cited 22Dec.2024];12(47):47-9. Available from: https://journal.tvu.edu.vn/tvujs_old/index.php/journal/article/view/924